T-Series

Reduced operating torque

ASME 150 – 2500 Class*

The MOGAS T-Series trunnion-mounted ball valve is available in either metal-seated and soft-seated from 3 to 60 inch, and two- or three-piece designs, with operating temperature from -50° F to 400° F (-45 to 204° C).

The valve retains many of the time-tested features of the C-Series, such as an actuator mounting pad, but with a trunnion design. Its reduced operating torque results in an overall less expensive valve and actuator package.

(* Not all size / pressure class combinations available.)

Design

3 to 60 inch (80 to 1500 DN)
Bi-directional
API 6D or ASME B16.34
Suitable temperature range: –50 to 400° F (–46 to 204° C)
Suitable for high-cycle services

Options

ASME 150 to 2500 Class (not all size / pressure class combinations available)
Metal seated or soft seated
Fire safe design
Cast or forged body; 2 or 3-piece
Process and customer-specific body and trim materials
Process and customer-specific coatings
Adjustable or non-adjustable stem packing
Spiral-wound body gasket or O-ring body joint seals

Slurry and Wastewater Transportation

By-pass lines
Underground dewatering
Seawater pipelines
Industrial waste water

Autoclave

Steam/recovery plant

Power Generation

Boiler feed water
Fuel gas lines

Oil & Gas

Drains and secondary isolation applications for:
Heater vessels
Steam applications
Vents
High pressure air
Quench and flash vessels
High cycle applications

Chemical / Petrochemical

Hydrocarbon
Vapor products
Slurry
Liquid
Large diameter applications
Amines, MDEA

Refining

Oxygen, hydrogen, nitrogen
Cold, high pressure separation
Cutting water pump isolation
Reactor overhead line
Amines